CB-2500
The Model CB-2500 waste oil furnace produces approximately 250,000 BTU/hr and is extremely popular at facilities such as 2 to 4 bay auto repair and truck service shops. The CB-2500 is highly versatile and reliable and can be easily ceiling mounted or used in conjunction with a Clean Burn Recycling Center. Although many factors affect furnace selection, the CB-2500 is frequently used in facilities generating or collecting more than 1000 gallons of waste oil annually. A Clean Burn Distributor is the expert you want for furnace selection and installation.
MODEL INFORMATION
FEATURES
Engineered from the ground up to burn waste oils
Patented heat exchanger generates more heat
Unique non-welded flue tubes for longer service life
Advanced burner preheats oil to optimize combustion
Swing-away burner and door make service easy
Longest cleaning interval of all units in its class
Lower stack temperatures, higher heat output
Automatic flow control means no fuel adjustment required
Ideal for unit heating or with a Clean Burn Recycling Center
Unequaled service and support from Clean Burn Distributors
SPECS
| Model CB-2500 | Specs. |
|---|---|
| *Maximum BTU/hour | 250,000 (73 kW) |
| *Maximum oil consumption | 1.7 GPH (6.4 L/h) |
| Fuels | Used oils: Crankcase,ATF, hydraulic Fuel oils: #2, #4, and #5 fuel oil |
| Air flow output (CFM) | Unit heater 2700 Central furnace (ducted) 0.25 SPWC (in.) 2500 0.30 SPWC (in.) 2400 |
| *Air compressor required | 2.5 CFM @ 25 PSI (4.25 m3/h @ 1.7 bar) |
| Stack Size | 8 inch dia.(20cm dia.) |
| Furnace Dimensions, Assembled | 103.25” L x 29.25 W x 31.5 H (262cm x 74cm x 79cm) |
| Approx. Weight (uncrated) | 509 pounds (229.1 kg) |
| Electrical Requirements | 115 VAC 60 Hz, single phase 30 A circuit breaker |
*Values indicated above are nominal. Actual values will vary depending on fuel and installation.
RESOURCES
