CB-1750

CB-1750

The Clean Burn Model CB-1750 produces approximately 175,000 BTU/hr. and is the smallest of the low profile designs, making it ideal for numerous applications and convenient installations. As a broad guideline, the Model CB-1750 is suitable for facilities generating smaller quantities of waste oil annually

MODEL INFORMATION

FEATURES

 Engineered from the ground up to burn waste oils

Patented heat exchanger generates more heat

Unique non-welded flue tubes for longer service life

Advanced burner preheats oil to optimize combustion

Swing-away burner and door make service easy

Longest cleaning interval of all units in its class

Lower stack temperatures, higher heat output

Automatic flow control means no fuel adjustment required

Ideal for unit heating or with a Clean Burn Recycling Center

Unequaled service and support from Clean Burn Distributors

SPECS
Model CB-1750Specs.
*Maximum BTU/hour175,000 (51.25 kW)
*Maximum oil consumption1.2 GPH (4.54 L/h)
FuelsUsed oils: Crankcase,ATF, hydraulic
Fuel oils: #2, #4, and #5 fuel oil
Air flow output (CFM)Unit heater 1700
Central furnace (ducted)
0.25 SPWC (in.) 1500
0.30 SPWC (in.) 1400
*Air compressor required2.0 CFM @ 25 PSI
(3.4 m3/h @ 1.7 bar)
Stack Size8 inch dia.(20cm dia.)
Furnace Dimensions, Assembled83.25” L x 29.25 W x 31.5 H
(219cm x 74cm x 79cm)
Approx. Weight (uncrated)406 pounds (182.7 kg)
Electrical Requirements115 VAC 60 Hz, single phase
30 A circuit breaker

*Values indicated above are nominal. Actual values will vary depending on fuel and installation.

RESOURCES

CB-1750 User Manual

CB-1750 Bid Specs