Page 12 - Clean Burn 4x9 Brochure 2012

Heating surface:

Boiler water volume:

Design water flow per coil

Cabinet dimensions

Overall dimensions (with burner/breach/plumbing)

Recommended clean-out

39 sq. ft. / 3.6 sqM

5 gal. / 19 L

15 gpm / 57 lpm

39.5" L x 29" W x 29" H 1003 mm x 737 mm x 737 mm

57.5" L x 33.25" W x 37" H (1460mm x 844mm x 939mm)

750 hours

Model CB-200-CTB

*Maximum BTUoutput:

148,500 (43.5 kW)

*Maximum oil consumption

1.4 GPH (5.3 L/h)

Fuels

Used oils Crankcase, ATF, hydraulic Fuel oils #2, #4, and #5 fuel oil

*Air compressor req’d

2.0 CFM @ 20 PSI (3.4 m3/h @ 1.4 bar)

Stack size

8 inch dia. (203mm dia.)

Approx. weight (uncrated)

677 pounds (304.7 kg)

Electrical requirements

115 VAC 60 Hz, single phase

*Maximum BTU/input:

200,000 (58.6 kW)

Used-Oil

Recycling Center

When used in combination with a Clean Burn furnace, a state-of-the-art Clean Burn Recycling Center is the ideal system for collecting, storing and generating heat recovered from used oils. The Clean Burn Recycling Center works with most Clean Burn used-oil furnace models and includes a 215 gallon storage tank. A Clean Burn Recycling Center makes oil handling and free heat generation easier because it combines the tank and furnace in one convenient unit complete with all vents, connectors, brackets, mounting plates and wiring harnesses.

Your Clean Burn Distributor is a qualifed expert in system selection, installation and service, and will make sure you get the system that is perfect for your facility.

www.CleanBurn.com

11

Specifcations are subject to change without notice.